Bill of materials
Qty. | Component | |
---|---|---|
4 | Wheel | |
4 | Spacer 20mm | |
24 | Washer M5 | |
8 | Washer M3 | |
8 | Screw M3 8mm | |
2 | Screw M5 16mm | |
2 | Nut M5 | |
1 | T8 2mm Lead 2mm Pitch T Thread POM Trapezoidal Screw Nut |
This part is used to hold the tool/spindle. The predrilled holes are suitable for these tools:
Step 1: Attach the spacers
Attach the spacers to the plate using M3 8mm screws.
Step 2: Add washers and wheel
On each spacer, add 5 M5 washers then a wheel followed by another M5 washer and lastly one M3 washer. Fasten using one M3 8mm screw.